KOBE-30

AWS A5.1 / ASME SFA-5.1 : E6013
การจัดประเภท : SMAW (MMA) CARBON STEEL

SMAW (MMA) CARBON STEEL
AWS A5.1 / ASME SFA-5.1 : E6013 
JIS Z3211 E4313 
TIS 49-B-E 43 13 A

เส้นผ่านศูนย์กลาง: 2.6 / 3.2 / 4.0

บรรจุภัณฑ์: 20 Kg

KOBE-30 is a high titania covered electrode that provides a strong and stable arc, enabling excellent welding in vertical and downward positions.

The weld surface is smooth and shiny. With good mechanical properties, easy slag removability 

Application

Suitable for welding thin steel structures, thin steel plates in shipbuilding, railways and automobiles made of mild steel

คุณสมบัติ

Typical chemical composition of weld metal (wt%)

C

Si

Mn

P

S

0.09

0.28

0.39

0.011

0.014

Typical mechanical properties of all-weld metal

Condition

Y.S. (MPa)

T.S. (MPa)

El. (%)

IV 0 °C (J)

AW

450

510

25

-

Sizes available and recommendation currents (AC or DCEP)

Diameter (mm)

2.6

3.2

4.0

5.0

Length (mm)

350

350

400

400

Current (A)

F

45 - 95

60 - 120

105 - 170

150 - 220

V & OH

45 - 95

60 - 125

100 - 150

125 - 190

Packaging (kg)

5

5

5

5

Carton (kg)

20

20

20

20

Approvals

JIS TIS

Notes on usage:

  1. Do not use welding currents higher than the recommended range (as shown in the table below or attached to the welding wire box). This is because not only does it reduce the X-ray inspection capability, it also causes excessive weld spatter, edge etching and insufficient slag coverage.
  2. For best results, the welding electrode should be baked at 70-100ºC for 30-60 minutes before use. Excessive moisture absorption by the welding electrode will reduce its performance and may cause air bubbles to form in the weld.

-